Next Lesson

Introduction to the TC Cable Anchor

TC Anchor Installation Introduction to the TC Cable Anchor

Components

Event Indicator:

Spring Steel Ring concealing Indicator Ribbon
Concave Event Indicator
10 Ton AMS Compact Barrel and Wedges

Components

Event Indicator:

1.Spring Steel Ring concealing Indicator Ribbon

2.Concave Event Indicator

3.10 Ton AMS Compact Barrel and Wedges

Unit identification:

Components

Safety Net Hook
150 x 8 Plate with Stiffener
10 Ton Compact Barrel with MG2 Wedge
18 x 20 Black Pipe 500 millimetre
11 x 14 Green HDPE Pipe
15 Millimetre Strand
15 Millimetre taper Cone MG2 Wedge
3 Part Shell and 60 Millimetre Spring
Blue Head Cover
Ferrule

This is the TC Cable Anchor. The purpose of the TC Cable Anchors is to support an underground working place. To provide a compressive force, using the cable anchor, into a fractured rock mass to help it to become competent once more

Unit identification:

Components

1.Safety Net Hook

2.150 x 8 Plate with Stiffener

3.10 Ton Compact Barrel with MG2 Wedge

4.18 x 20 Black Pipe 500 millimetre

5.11 x 14 Green HDPE Pipe

6.15 Millimetre Strand

7.15 Millimetre taper Cone MG2 Wedge

3 Part Shell and 60 Millimetre Spring

9.Blue Head Cover

10.Ferrule

Now that you know the TC CABLE ANCHOR components, we will start off and introduce you to the correct processes to be followed so that the correct installation is achieved to support the rock mass and create a safe working environment.

Picture 1

Ensure that the correct PPE is worn at all times to prevent eye injuries and cement burns:

Back to Course

Next Lesson