- During loading, a sufficient number of well trained and properly instructed personnel shall load RSJ’s or channel liners from the back of a truck and push them in. Under no circumstances will RSJ’s and liners be loaded on the sides of any vehicle.
- In the shaft during repairs, only well trained and properly instructed shaft personnel who are under the direct supervision of the Shaft Timberman or shaft boilermaker shall manhandle RSJ’s.
- RSJ’s and channel liners shall be transported into the underground workings with the use of material cars that were designed for the purpose.
OTHER EQUIPMENT OR MATERIAL OTHER THAN MENTIONED ABOVE
- Equipment or material that weighs less than 1,5 tons may be handled by any properly instructed person.
- Only a qualified rigger or a Timberman in the shaft will handle equipment or material that weighs more than 1,5 tons.